- ☀1/10 oil-driven flat sports car, using 18CXP engine (dual oil needle engine), all-metal hydraulic shock absorber, all-metal hydraulic shock absorber, chassis and second floor (CNC aluminum alloy parts), secondary mechanical type Automatic transmission, four-wheel drive, not easy to lose dog bones
- ☀High-quality shock absorbers, equipped with professional-grade screw-type adjustable hydraulic shock absorbers, high-efficiency four-wheel disc brake system, high-density air filter sponge, 2.5 mm thick aluminum alloy chassis, all-wheel positioning independently adjustable
- ☀The whole car uses ball bearings, rolling bearings, high-quality flat sports rubber tires, anti-skid and wear-resistant, this car is equipped with metal clutch transmission gear, metal middle differential gear, to ensure super-strength sports performance.
- ☀This car is equipped with a 75cc large-capacity fuel tank, one tank of fuel can last about 45 minutes, and you can continue to refuel in the middle. Large-capacity fuel tank with fuel lines and spring glands for easy refueling
- ☀3-channel 2.4G remote control, full-scale control of the throttle, independent three-way receiver, and another one can be modified by yourself for upgrading
Item Name: Nitro Powered 1/10 RC Car
Color: Yellow
Material: PVC Electronic Components Metal Rubber
Scale: 1/10
Drive: 4WD
Max Speed: 90km/h
Remote Control Frequency: 2.4G
Length: 400mm
Vehicle Width: 250mm
Height: 165mm
Wheelbase: 275mm
Tread: 185mm
Gear Ratio: 1:5.84 (L), 1:8.58 (H)
Ground Clearance: 26mm
Wheel Diameter: 86mm
Wheel Width: 40mm
Eninge: 18cxp Methanol Engine
Fuel Tank Capacity: 75CC
Fuel Requirements: 10%-30% Professional Methanol Fuel
Product Size: 15.8 x 9.85 x 6.5IN/ 40 x 25 x 16.5cm
Product Weight: 1850g
Package Dimensions: 60.5 x 29 x 20cm
Package Weight: 3484g
Packing: Graphic Carton
Nitro Gas RC Car Starting Attention:
1. Glow: Be sure that your glow plug igniter is charged and your glow plug is in good condition. Be sure that your glow plug will stay lit for 10 seconds.
2. Pull starter: Please pull the start cord correctly when firstly starting as the pull starter is a easy-worn part.
3. Novice: If you are a Nitro Gas RC car novice, we recommend that you should get help with setting and running from our customer service representative in first time
What's in the box:
-1x 1/10 Scale Buggy
-1x 2.4G Transmitter
-1x Manual
-1x Glow plug igniter
What you'll need:
-Nitro fuel 16% or 20%
-8 x AA Batteries
